Salicylic acid

Cat#A93

CAS Number : 69-72-7

Molecular formula : C7H6O3

Molecular weight :138.12g/mol

Storage: Room Temperature

Size:250g

Category:

Do You Have Questions/Problems?

worried man on the computerNo worries :) Send us an email and we’ll be happy to help you!

Email: info@maxprecisionlab.com

PRODUCT AND COMPANY IDENTIFICATION

    1. Product identifiers

Cat#A93

CAS Number : 69-72-7

Storage Temperature: Room Temperature

Size:250g

    1. Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances

    1. Details of the supplier of the safety data sheet

MaxPrecision Lab

30 N, Gould St. STE 4000

Sheridan, Wyoming, 82801, USA Phone : 3072986183

www.maxprecisionlab.com

  1. HAZARDS IDENTIFICATION

    1. GHS Label elements, including precautionary statements

Not a hazardous substance or mixture.

    1. Hazards not otherwise classified (HNOC) or not covered by GHS none

  1. COMPOSITION/INFORMATION ON INGREDIENTS

    1. Substances

Molecular formula : C7H6O3 Molecular weight :138.12g/mol CAS : 69-72-7

  1. FIRST AID MEASURES

    1. Description of first aid measures

If inhaled : If breathed in, move person into fresh air. If not breathing, give artificial respiration.

In case of skin contact : Wash off with soap and plenty of water. In case of eye contact : Flush eyes with water as a precaution.

If swallowed : Never give anything by mouth to an unconscious person. Rinse mouth with water.

    1. Most important symptoms and effects, both acute and delayed

As far as we know, the chemical, physical, and toxic properties have not yet been fully studied.

    1. Indication of any immediate medical attention and special treatment needed

no data available

  1. FIREFIGHTING MEASURES

    1. Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

    1. Special hazards arising from the substance or mixture

Carbon oxides

    1. Advice for firefighters

Wear self contained breathing apparatus for fire fighting if necessary.

  1. ACCIDENTAL RELEASE MEASURES

    1. Personal precautions, protective equipment and emergency procedures

Avoid dust formation. Avoid breathing vapors, mist or gas. For personal protection see section 8.

    1. Environmental precautions

Do not let products enter drains.

    1. Methods and materials for containment and cleaning up

Sweep up and shovel. Keep in suitable, closed containers for disposal.

    1. Reference to other sections

For disposal see section 13.

  1. HANDLING AND STORAGE

    1. Precautions for safe handling

Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.

    1. Conditions for safe storage, including any incompatibilities

Keep the container tightly closed in a dry and well-ventilated place. Recommended storage temperature : RT

Keep in a dry place. hygroscopic Keep in a dry place.

    1. Specific end use(s)

None

  1. EXPOSURE CONTROLS/PERSONAL PROTECTION

    1. Control parameters

Components with workplace control parameters

Contains no substances with occupational exposure limit values.

    1. Exposure controls

Appropriate engineering controls : General industrial hygiene practice. Personal protective equipment

Eye/face protection : Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection : Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Body Protection : Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection : Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Control of environmental exposure : Do not let products enter drains.

  1. PHYSICAL AND CHEMICAL PROPERTIES

    1. Information on basic physical and chemical properties

    2.  Appearance Form: powder

    3.  Colour: white

  1. Odour no data available

  2. Odour Threshold no data available

  3. pH no data available

  4. Melting point/freezing point no data available

  5. Initial boiling point and boiling range no data available

  6. Flash point no data available

  7. Evaporation rate no data available

  8. Flammability (solid, gas) no data available

  9. Upper/lower flammability or explosive limits no data available

  10. Vapour pressure no data available

  11. Vapour density no data available

  12. Relative density no data available

  13. Water solubility no data available

  14. Partition coefficient: noctanol/water no data available

  15. Auto-ignition temperature no data available

  16. Decomposition temperature no data available

  17. Viscosity no data available

  18. Explosive properties no data available

  19. Oxidizing properties no data available

  1. STABILITY AND REACTIVITY

    1. Reactivity

no data available

    1. Chemical stability

no data available

    1. Possibility of hazardous reactions

no data available

    1. Conditions to avoid

no data available

    1. Incompatible materials

Strong oxidizing agents

    1. Hazardous decomposition products

Other decomposition products- no data available

  1. TOXICOLOGICAL INFORMATION

    1. Information on toxicological effects

Acute toxicity – no data available

Skin corrosion/irritation – no data available

Serious eye damage/eye irritation – no data available Respiratory or skin sensitisation – no data available Germ cell mutagenicity – no data available Carcinogenicity

IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH.

NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.

OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA.

Reproductive toxicity – no data available

Specific target organ toxicity – single exposure no data available

Specific target organ toxicity – repeated exposure no data available

  1. ECOLOGICALINFORMATION

    1. Toxicity

no data available

    1. Persistence and degradability

no data available

    1. Bioaccumulative potential

no data available

    1. Mobility in soil

no data available

    1. Results of PBT and vPvB assessment

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

    1. Other adverse effects

no data available

  1. DISPOSALCONSIDERATIONS

    1. Waste treatment methods

Product : Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging : Dispose of as unused product.

  1. TRANSPORTINFORMATION

DOT (US) : Not dangerous goods IMDG : Not dangerous goods IATA : Not dangerous goods

  1. REGULATORYINFORMATION

    1. Regulations / legislation specifically for this substance or mixture.

Applicable regulations

Please notice that waste disposal should also meet the requirements of local regulations.